- all-round coat achieving two to three times the performance of TiN.
- excellent, near "fire-resistant" heat resistance, considerably better thatn with TiN
- high toughness, therefore well suited for interrupted cutting
- optimal adhesion through TiN-layer. The more abrasive the workpiece, the more important the adhesion.
- good cushioning of vibrations from worn spindles or shocks through interrupted cutting.
- excellent surface qualities thanks to lower friction coefficient especially when MOVIC and FIREX are combined
- FIREX plus MOVIC® - the ideal combination for dry and HSC machining
- very high hardness: 3600 HV30 (fig. 14).
|
Back to: News | FIREX - TOC