|
| 
Back to: Products | Drills
| |||
| Type | Tool illustration | Shank | Tool material | Surface finish | Series no. | |||
|---|---|---|---|---|---|---|---|---|
| Stub drill DIN 1897 | Jobber drill DIN 338 | Long DIN 340 | Extra long DIN 1869 | |||||
| GT100 | 
| cyl. |  | 
| 549 | 535 | 502 | |
| 
| 652 | 668 | 670 | ||||
| 
| 2457 | 2462 | |||||
 Type P1 - with wave cut 
| 
| 2044 | ||||||
|
| 
|
| 622 | 336 | 618 | |||
|
|
| 658 | ||||||
|
|
| 2459 | ||||||
| 
| 1223 | ||||||
| 
| 1221 | ||||||
|
Type P1 - with wave cut
|
| 2045 | ||||||
| Morse taper |
|
| 558 | 526 | 563 | ||
|
| 606 | ||||||
|
|
|
| 645 | 620 | 621 | |||
|
|
| 662 | ||||||
|
| 1224 | ||||||
|
| 1222 | ||||||
| Application: For drilling in long-chipping materials with a tensile strength of up to 1000 N/mm2 , with thick web, very wide flutes, and wide "rolled-off" heels. | ||||||||
| GT80 | 
| cyl. |
| 
| 552 | |||
|
|
| 2460 | |||||
|
| 1228 | ||||||
| Application: Very robust, rigid drill for use in automatic and capstan lathes up to a tensile strength of 800 N/mm2. | ||||||||
| GT50 | cyl. |
| 
| 501 | 524 | |||
| Morse taper |
| 525 | ||||||
| ||||||||
| Application: For use in materials up to a tensile strength of 500 N/mm2, especially in dee holes and long-chipping materials. | ||||||||
The GT 800 WP
| Back to top |