Ratio Drill with Oil Feed

	Type RT 100 U DIN 6537
Manufacturing specifications	Point grinding: relieved cone with secondary flank Point angle: greater than standard (140º) Web thinned: Guhring web thinning Form U Helix angle: standard Web thickness: greater than standard Web taper: none Flute form: standard Tolerance on diameter: m7 Oil feed: spiral through the body Shank: reinforced, with whistle notch flat, according DIN 6537 HE, h6 tolerance Other manufacturing specifications to DIN 6540.
Range of applications	High-performance drill for the drilling of long and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to 1000 N/mm˛, including carbon steels, cast iron and high- alloyed AlSi-alloys. This tool is also available TiAIN- and TiCN-coated, for performance increase in special operations. Recoating is recommended when regrinding. TiCN-tools can be recoated with TiN (S-coat). Advantages, Suggestions Highest speed and feed rates possible (see Guroguide), high alignment accuracy with tight tolerance and excellent surface finish. Excellent self-centering qualities as well as producing short chips thanks to a concave cutting point geometry with special point grind and web thinning. Pre-conditions for use Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds. The tools are available without whistle notch flat for the application in hydraulic chucks. High performance increase due to the FIREX coating!
Sketch
Tool material	carbide
Cutting direction	right hand-cutting
Surface
Ø-range	5.00 - 20.00 mm
Series No.	2469