| Series no. |
Description |
Standard |
Tool
material |
Surface |
| 301 | micro-precision drill, form A, type N, straight | DIN 1899 | HSCO | bright
|
| 303 | micro-precision drill, form A, type N, straight, l.h.-cutting | DIN 1899 | HSCO | bright
|
| 305 | jobber drill, type N, straight | DIN 338 | HSCO | steam temp.
|
| 308 | jobber drill, type N, straight, l.h.-cutting | DIN 338 | HSCO | steam temp.
|
| 311 | bushing drill, type N, straight | DIN 339 | HSCO | steam temp.
|
| 317 | long shank drill, type N, straight | DIN 340 | HSCO | steam temp.
|
| 324 | counterbore for fine tolerances, straight | DIN 373 | HSS | S
|
| 325 | counterbore for medial tolerances, straight | DIN 373 | HSS | S
|
| 326 | counterbore for key holes, straight | DIN 373 | HSS | S
|
| 327 | taper countersink 90º, type C, straight | DIN 335 | HSS | S
|
| 328 | taper countersink 90º, type D, taper shank | DIN 335 | HSS | S
|
| 329 | jobber drill, type GV 120, straight | DIN 1897 | HSCO | steam temp.
|
| 330 | jobber drill, type GV 120, straight, l.h.-cutting | DIN 1897 | HSCO | steam temp.
|
| 336 | long shank drill, type GT 100, straight | DIN 340 | HSCO | nitr. lands
|
| 345 | twist drill, type N, taper shank | DIN 345 | HSCO | steam temp.
|
| 351 | twist drill with oversize Morse taper, type N, taper shank | DIN 346 | HSCO | steam temp.
|
| 357 | bushing drill, type N, taper shank | DIN 341 | HSCO | steam temp.
|
| 363 | jobber drill, type GV 120, taper shank | Guhring | HSCO | steam temp.
|
| 370 | twist drill with oil feed, type GT 100, taper shank | ~DIN 341 | HSCO | steam temp.
|
| 371 | twist drill with oil feed, type GT 100, taper shank | ~DIN 341 | HSCO | steam temp.
|
| 372 | twist drill with oil feed, type GT 100, taper shank | ~DIN 341 | HSCO | steam temp.
|
| 374 | twist drill with oil feed, type GT 100, taper shank | ~DIN1870 | HSCO | steam temp.
|
| 375 | twist drill with oil feed, type GT 100, taper shank | ~DIN1870 | HSCO | steam temp.
|
| 376 | twist drill with oil feed, type GT 100, taper shank | ~DIN1870 | HSCO | steam temp.
|
| 378 | straight shank short step drill 90º, type N, straight | Guhring | HSS | bright
|
| 379 | straight shank short step drill 180º, type N, straight | Guhring | HSS | bright
|
| 380 | straight shank short step drill 90º, type N, straight | Guhring | HSS | bright
|
| 381 | center drill, type A | DIN 333 | HSCO | bright
|
| 390 | twist drill with oil feed, type N, straight | Guhring | HSS | bright
|
| 3013 | face cutters, 45º | DIN 847 | HSS | bright
|
| 3025 | bore milling cutter, type NR | DIN 841 | HSCO | bright
|
| 3027 | bore milling cutter, type NF | DIN 841 | HSCO | bright
|
| 3028 | face cutters, 60º | DIN 847 | HSS | bright
|
| 3029 | face cutters, 90º | DIN 847 | HSS | bright
|
| 3117 | shanked milling cutter, short, type NR, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3118 | shanked milling cutter, short, type NF, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3120 | shanked milling cutter, long, type N, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3121 | shanked milling cutter, long, type NR, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3122 | shanked milling cutter, long, type NF, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3130 | shanked milling cutter, short, type N, form A, BT taper | DIN 2328 | HSCO | bright
|
| 3131 | shanked milling cutter, short, type NR, BT taper | DIN 2328 | HSCO | bright
|
| 3133 | shanked milling cutter, long, type N, form A, BT taper | DIN 2328 | HSCO | bright
|
| 3134 | shanked milling cutter, long, type NR, BT taper | DIN 2328 | HSCO | bright
|
| 3163 | T-slot cutter, type N, form B, taper shank | DIN 851 | HSS | bright
|
| 3176 | finishing profile cutter, form D, whist.notch | DIN 6518 | HSCO | steam temp
|
| 3185 | bore milling cutter, type NR | DIN 1880 | HSCO | bright
|
| 3187 | bore milling cutter, type NF | DIN 1880 | HSCO | bright
|
| 3199 | side cutter, type W, form A | DIN 885 | HSCO | bright
|
| 3200 | shanked milling cutter, short, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3201 | shanked milling cutter, long, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3203 | shanked milling cutter, type NH, form A, straight | DIN 6528 | carbide | bright
|
| 3204 | shanked milling cutter, long, type NRf, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3205 | shanked milling cutter, long, type NRf, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3206 | gear and radius cutters concave, form A | DIN 855 | HSS | bright
|
| 3207 | gear and radius cutters convex | DIN 856 | HSS | bright
|
| 3210 | shanked milling cutter, long, type NH, form A, whist.notch | DIN 6527 | cermet | bright
|
| 3211 | finishing end mill with radius, type N, form A, straight | DIN 6527 | cermet | bright
|
| 3212 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3213 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3218 | shanked milling cutter, type N, screw.straight | ~DIN 6528 | carbide | bright
|
| 3220 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3221 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3222 | shanked milling cutter, type N, whist.notch | ~DIN 6528 | carbide | bright
|
| 3223 | shanked milling cutter, type N, whist.notch | ~DIN 6528 | carbide | bright
|
| 3226 | shanked milling cutter, type N, screw.straight | ~DIN 6528 | carbide | bright
|
| 3228 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3229 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3234 | shanked milling cutter, type N, screw.straight | ~DIN 6528 | carbide | bright
|
| 3235 | shanked milling cutter, type N, screw.straight | ~DIN 6528 | carbide | bright
|
| 3237 | finishing profile cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3244 | finishing profile cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3245 | finishing profile cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3250 | gear cutter | Guhring | HSS | bright
|
| 3257 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3258 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | bright
|
| 3285 | shanked milling cutter, short, type NH, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3286 | shanked milling cutter, long, type NH, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3294 | shanked milling cutter, short, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3295 | shanked milling cutter, long, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3296 | shanked milling cutter, short, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3297 | shanked milling cutter, long, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3298 | shanked milling cutter, short, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3299 | shanked milling cutter, long, type N, form B, whist.notch | DIN 6527 | carbide | bright
|
| 3303 | shanked milling cutter, type N, form A, straight | DIN 6528 | carbide | bright
|
| 3304 | shanked milling cutter, type N, form A, straight | DIN 6528 | carbide | bright
|
| 3305 | finishing profile cutter, type N, form A, straight | DIN 6528 | carbide | bright
|
| 3306 | finishing profile cutter, type N, form A, straight | DIN 6528 | carbide | bright
|
| 3321 | shanked milling cutter, type NRf, form D, whist.notch | DIN 327 | PM HSS-E | bright
|
| 3322 | shanked milling cutter, short, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3323 | shanked milling cutter, long, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3336 | shanked milling cutter, type NR, BT taper | Guhring | HSCO | bright
|
| 3337 | shanked milling cutter, type NR, BT taper | Guhring | HSCO | bright
|
| 3338 | bore milling cutter, type NF | DIN 1880 | M42 | bright
|
| 3340 | shanked milling cutter, short, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3341 | shanked milling cutter, short, type NRf, form B/C, taper shank | DIN 845 | PM HSS-E | bright
|
| 3342 | shanked milling cutter, long, type NF, form B, whist.notch | DIN 844 | M42 | bright
|
| 3343 | shanked milling cutter, short, type NF, form B, whist.notch | DIN 844 | M42 | bright
|
| 3346 | shanked milling cutter, short, type NR, form B, whist.notch | DIN 844 | M42 | bright
|
| 3347 | shanked milling cutter, long, type NR, form B, whist.notch | DIN 844 | M42 | bright
|
| 3400 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | HSCO | bright
|
| 3416 | shanked milling cutter, type N, BT taper | Guhring | HSCO | bright
|
| 3418 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3419 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3420 | shanked milling cutter, short, type N, form B/C, taper shank | DIN 845 | M42 | bright
|
| 3421 | shanked milling cutter, long, type N, form B/C, taper shank | DIN 845 | M42 | bright
|
| 3428 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3429 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3431 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3432 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3433 | shanked milling cutter, type N, form B, whist.notch | ~DIN 844 | M42 | bright
|
| 3440 | shanked milling cutter, short, type N, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3442 | shanked milling cutter, short, type N, form B/C, taper shank | DIN 845 | PM HSS-E | bright
|
| 3443 | shanked milling cutter, long, type N, form B/C, taper shank | DIN 845 | PM HSS-E | bright
|
| 3444 | shanked milling cutter, short, type W, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3445 | shanked milling cutter, long, type W, form B/C, taper shank | DIN 845 | HSCO | bright
|
| 3450 | shanked milling cutter, type N, form D, whist.notch | DIN 327 | HSCO | bright
|
| 3451 | shanked milling cutter, type N, form D, whist.notch | DIN 327 | M42 | bright
|
| 3452 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3453 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3458 | shanked milling cutter, type N, form D, whist.notch | DIN 327 | M42 | bright
|
| 3459 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3460 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | bright
|
| 3465 | shanked milling cutter, short, type NH, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3466 | finishing profile cutter, type N, form D, whist.notch | DIN 327 | M42 | bright
|
| 3467 | finishing profile cutter, type N, whist.notch | ~DIN 327 | M42 | bright
|
| 3468 | shanked milling cutter, type NRf, whist.notch | ~DIN 844 | M42 | bright
|
| 3469 | shanked milling cutter, type N, whist.notch | ~DIN 844 | M42 | bright
|
| 3470 | shanked milling cutter, type NR, whist.notch | ~DIN 844 | M42 | bright
|
| 3471 | shanked milling cutter, type N, whist.notch | ~DIN 844 | M42 | bright
|
| 3472 | shanked milling cutter, type NR, whist.notch | ~DIN 844 | M42 | bright
|
| 3473 | shanked milling cutter, type N, whist.notch | ~DIN 844 | M42 | bright
|
| 3474 | shanked milling cutter, short, type NH, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3475 | shanked milling cutter, long, type NH, form B, whist.notch | DIN 844 | PM HSS-E | bright
|
| 3500 | bore milling cutter, type N | DIN 841 | HSCO | bright
|
| 3501 | bore milling cutter, type H | DIN 841 | HSCO | bright
|
| 3502 | bore milling cutter, type W | DIN 841 | HSCO | bright
|
| 3503 | bore milling cutter, type N | DIN 1880 | HSCO | bright
|
| 3504 | bore milling cutter, type N | DIN 1880 | M42 | bright
|
| 3505 | bore milling cutter, type H | DIN 1880 | M42 | bright
|
| 3506 | bore milling cutter, type W | DIN 1880 | HSCO | bright
|
| 3530 | side cutter, type N, form A | DIN 885 | HSCO | bright
|
| 3531 | side cutter, type H, form A | DIN 885 | HSCO | bright
|
| 3532 | side cutter, type H, form B | DIN 885 | HSCO | bright
|
| 3570 | T-slot cutter, type N, form AB, whist.notch | DIN 851 | HSS | bright
|
| 3571 | T-slot cutter, type N, form AD, screw.straight | DIN 851 | HSCO | bright
|
| 3572 | single angle cutter, 45º, type H, form C, whist.notch | DIN 1833 | HSS | bright
|
| 3573 | single angle cutter, 50º, type H, form C, whist.notch | DIN 1833 | HSS | bright
|
| 3574 | single angle cutter, 60º, type H, form C, whist.notch | DIN 1833 | HSS | bright
|
| 3575 | single angle cutter, 70º, type H, form C, whist.notch | DIN 1833 | HSS | bright
|
| 3576 | single angle cutter, 45º, type H, form D, whist.notch | DIN 1833 | HSS | bright
|
| 3577 | single angle cutter, 60º, type H, form D, whist.notch | DIN 1833 | HSS | bright
|
| 3578 | single angle cutter, 70º, type H, form D, whist.notch | DIN 1833 | HSS | bright
|
| 3579 | woodruff cutter, type H, form C, whist.notch | DIN 850 | HSS | bright
|
| 3580 | woodruff cutter, type N, form D, whist.notch | DIN 850 | HSS | bright
|
| 3601 | shanked milling cutter, type NRf, form D, whist.notch | DIN 327 | PM HSS-E | S
|
| 3602 | shanked milling cutter, short, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | S
|
| 3613 | shanked milling cutter, type N, form D, whist.notch | DIN 327 | M42 | S
|
| 3615 | shanked milling cutter, type N, form D, whist.notch | DIN 327 | M42 | S
|
| 3623 | shanked milling cutter, short, type NH, form B, whist.notch | DIN 6527 | carbide | S
|
| 3638 | shanked milling cutter, short, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | S
|
| 3642 | shanked milling cutter, long, type NR, form B, whist.notch | DIN 844 | M42 | S
|
| 3646 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | S
|
| 3647 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | S
|
| 3650 | shanked milling cutter, long, type NR, form B, whist.notch | DIN 844 | M42 | C
|
| 3651 | shanked milling cutter, type N, form D, whist.notch | DIN 327 | M42 | C
|
| 3654 | bore milling cutter, type N | DIN 1880 | M42 | C
|
| 3656 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3657 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3658 | shanked milling cutter, short, type N, form B/C, taper shank | DIN 845 | M42 | C
|
| 3659 | shanked milling cutter, long, type N, form B/C, taper shank | DIN 845 | M42 | C
|
| 3660 | shanked milling cutter, short, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3661 | shanked milling cutter, short, type NRf, form B/C, taper shank | DIN 845 | PM HSS-E | C
|
| 3662 | shanked milling cutter, short, type NH, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3663 | shanked milling cutter, type N, form D, whist.notch | DIN 327 | M42 | C
|
| 3664 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3665 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3668 | shanked milling cutter, short, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3669 | shanked milling cutter, short, type NF, form B, whist.notch | DIN 844 | M42 | C
|
| 3670 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3673 | bore milling cutter, type N | DIN 1880 | HSCO | A
|
| 3687 | shanked milling cutter, type NRf, form D, whist.notch | DIN 327 | PM HSS-E | C
|
| 3688 | shanked milling cutter, long, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3690 | shanked milling cutter, short, type NR, form B, whist.notch | DIN 844 | M42 | C
|
| 3692 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3694 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3695 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | C
|
| 3696 | shanked milling cutter, short, type N, form B/C, taper shank | DIN 845 | HSCO | C
|
| 3697 | shanked milling cutter, long, type N, form B/C, taper shank | DIN 845 | HSCO | C
|
| 3698 | shanked milling cutter, long, type NF, form B, whist.notch | DIN 844 | M42 | C
|
| 3699 | shanked milling cutter, short, type NR, form B/C, taper shank | DIN 845 | HSCO | C
|
| 3700 | shanked milling cutter, short, type NF, form B/C, taper shank | DIN 845 | HSCO | C
|
| 3701 | shanked milling cutter, long, type NR, form B/C, taper shank | DIN 845 | HSCO | C
|
| 3702 | shanked milling cutter, long, type NF, form B/C, taper shank | DIN 845 | HSCO | C
|
| 3703 | finishing profile cutter, type N, form D, whist.notch | DIN 327 | M42 | C
|
| 3704 | finishing profile cutter, type N, whist.notch | ~DIN 327 | M42 | C
|
| 3705 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3706 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3707 | shanked milling cutter, short, type N, form B/C, taper shank | DIN 845 | PM HSS-E | C
|
| 3708 | shanked milling cutter, long, type N, form B/C, taper shank | DIN 845 | PM HSS-E | C
|
| 3709 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | C
|
| 3710 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | C
|
| 3711 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | C
|
| 3712 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | C
|
| 3713 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | C
|
| 3714 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | C
|
| 3717 | shanked milling cutter, type N, whist.notch | ~DIN 6528 | carbide | C
|
| 3718 | shanked milling cutter, type N, whist.notch | ~DIN 6528 | carbide | C
|
| 3719 | shanked milling cutter, short, type N, form B, whist.notch | DIN 6527 | carbide | C
|
| 3720 | shanked milling cutter, long, type N, form B, whist.notch | DIN 6527 | carbide | C
|
| 3721 | shanked milling cutter, short, type N, form B, whist.notch | DIN 6527 | carbide | C
|
| 3722 | shanked milling cutter, long, type N, form B, whist.notch | DIN 6527 | carbide | C
|
| 3723 | shanked milling cutter, long, type NRf, form B, whist.notch | DIN 6527 | carbide | C
|
| 3724 | shanked milling cutter, long, type NRf, form B, whist.notch | DIN 6527 | carbide | C
|
| 3725 | finishing profile cutter, type N, form A, straight | DIN 6528 | carbide | C
|
| 3726 | shanked milling cutter with radius, type N, straight | ~DIN 6528 | carbide | C
|
| 3727 | finishing profile cutter, type N, form A, straight | DIN 6528 | carbide | C
|
| 3728 | finishing profile cutter, type N, straight | ~DIN 6528 | carbide | C
|
| 3729 | shanked milling cutter, short, type NH, form B, whist.notch | DIN 6527 | carbide | C
|
| 3730 | shanked milling cutter, long, type NH, form B, whist.notch | DIN 6527 | carbide | C
|
| 3731 | shanked milling cutter, short, type N, form B, whist.notch | DIN 6527 | carbide | C
|
| 3732 | shanked milling cutter, long, type N, form B, whist.notch | DIN 6527 | carbide | C
|
| 3733 | shanked milling cutter, type N, whist.notch | ~DIN 844 | M42 | C
|
| 3734 | shanked milling cutter, type N, whist.notch | ~DIN 844 | M42 | C
|
| 3735 | shanked milling cutter, type N, whist.notch | ~DIN 844 | M42 | C
|
| 3738 | shanked milling cutter, short, type NH, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3739 | shanked milling cutter, long, type NH, form B, whist.notch | DIN 844 | PM HSS-E | C
|
| 3741 | shanked milling cutter, type NH, form A, straight | DIN 6528 | carbide | C
|
| 3742 | bore milling cutter, type NF | DIN 1880 | HSCO | C
|
| 3743 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | S
|
| 3744 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | S
|
| 3745 | shanked milling cutter, short, type N, form B, whist.notch | DIN 844 | M42 | S
|
| 3746 | shanked milling cutter, long, type N, form B, whist.notch | DIN 844 | M42 | S
|
| 3747 | shanked milling cutter, long, type NRf, form B, whist.notch | DIN 844 | PM HSS-E | S
|
| 3748 | shanked milling cutter, type N, straight | ~DIN 6528 | carbide | S
|
| 3749 | bore milling cutter, type NR | DIN 1880 | HSCO | C
|
Back to: Products | Online-Catalogue